When something goes wrong with the plumbing in a Glenshaw home, the first move is usually the same: find the shutoff, stop the water, and figure out who to call. We handle that call every day from 7:30 AM to 10:30 PM, including weekends. From there, the job gets scoped on the phone, a price is confirmed before anything is scheduled, and the visit is booked. That is how it works from the first call to the finished repair.
Glenshaw is a town where most of the housing stock carries real age, and older homes bring their own plumbing picture. Original supply lines, cast-iron drain stacks, water heaters tucked into tight utility spaces, and sewer runs that have had decades to shift, crack, and collect roots. We work on all of it. Whether you are a homeowner dealing with a backed-up drain, a landlord coordinating a repair between tenants, or a property manager handling a water heater failure in a rental unit, we take the call and get the work done.
Some plumbing problems wait. A slow drain, a faucet that drips, a shutoff valve that feels stiff but still closes. Others do not. A burst pipe, a sewer backup, a water heater that stopped producing hot water, a leak that is working its way into a finished wall. For those calls, we take short-notice work and can often schedule around urgent situations.
When you call, the first thing we do is ask about what is happening. Describe the symptom, where in the home it is occurring, and whether the water is still running. That conversation lets us scope the job and give you a rate before the visit starts. You know what is covered before anyone arrives.
For rental properties and occupied units, access is part of the conversation too. We can work around a tenant's schedule, coordinate entry through a property manager, and confirm the timing before the visit. The invoice goes to whoever the account is set up under. We just need to know how the job is organized before we book it.
When a drain backs up repeatedly or a sewer line is slow despite being cleared, the problem is usually deeper than the cleaning reached. A camera inspection runs a line through the pipe and shows exactly what is in there: root intrusion, a cracked section, a bellied run that holds water, or a joint that has shifted. That information changes what the repair involves, and it is how we avoid digging up a yard to find something that turns out to be thirty feet away from where we started.
A pressure-reducing valve controls how much force the supply line delivers to the fixtures throughout the house. When one starts to fail, the symptoms vary. Some homes see pressure that climbs too high and hammers the pipes. Others see pressure that drops off and stays low at every faucet in the house. Replacing the regulator is a straightforward repair once the valve is identified as the source, and it is worth diagnosing before assuming the supply line itself is the problem.
A new appliance that is not connected correctly leaks from the start. An old connection that has never been looked at can develop the same problem slowly, dripping behind the machine or under the cabinet until the floor or the subfloor shows the damage. We handle both: new installations where the supply and drain connections need to be made correctly from the beginning, and existing connections that are leaking, corroded, or fitted with hose bib valves that have not been replaced in years.
A new sink or vanity changes the supply connections, the drain configuration, and sometimes the shutoff valves underneath. If the existing shutoffs are old and corroded, this is the right time to replace them. We handle the full installation, including the supply lines, the P-trap, and the drain connection to the wall. If the rough-in does not match the new fixture's dimensions, we work out the adjustment before anything is set in place.
A backflow preventer stops contaminated water from reversing direction and entering the supply. They are required on irrigation systems, fire suppression connections, and some commercial water lines. When a device fails, it either allows backflow or restricts flow in a way that affects pressure throughout the building. We test, repair, and replace backflow prevention devices and can confirm whether a property's setup meets what is required for the connection type.
A slow kitchen drain usually means grease and food debris have built up in the line. A bathroom drain that gurgles points to a partial blockage from hair and soap. A floor drain that backs up during heavy rain can mean the main line is struggling. We clear clogs in individual fixture drains and in main lines, and for buildup that a standard snake will not reach, hydro jetting clears the interior of the pipe rather than just punching through the obstruction.
A gas line that serves a water heater or a range needs to be sized and connected correctly. We handle the plumbing side of gas line work: the supply line to the appliance, the shutoff valve, and the connection at the fitting. For burst pipes, the priority is stopping the water and assessing how much of the run is affected. A single freeze crack in a supply line is a different repair than a section of pipe that has split along a corroded seam.
Property managers and landlords in Glenshaw call us for the same range of work homeowners do, but the coordination looks different. There is usually a tenant in the unit, a maintenance request that has already been logged, and a timeline that has to work around someone's schedule. We handle that. When you call, tell us how access is arranged, whether the tenant needs to be notified before entry, and who the invoice should go to. We confirm all of that before the visit is booked.
For multi-unit properties, a single repair call sometimes reveals a shared drain or a supply line condition that affects more than one unit. We scope what we find and discuss the options before any additional work is authorized. Nothing proceeds beyond the original scope without a conversation first.
The price we give on the call is based on what you describe. In most cases, that is enough to scope the job accurately. What changes a quote is what the job turns out to involve once the pipe or fixture is accessed. An older home that has had prior repairs done piecemeal, a drain line that runs further than the symptoms suggested, a shutoff valve that needs to be replaced before the fixture work can proceed. Those are the things that move a number.
Older homes in this area often hide older pipes behind newer walls. When that is a real possibility for the job you are describing, say so on the call. It helps us scope more accurately and avoids a conversation on-site about something that could have been discussed beforehand.
We explain what we find before we proceed with anything beyond the original scope. You get a clear picture of what changed and what it costs before the work continues.
Call (412) 991-9789 and the price is settled on the phone before anything is scheduled.
Glenshaw's housing stock includes homes where the original plumbing has never been fully replaced, only patched when something failed. Galvanized steel supply lines corroded from the inside out, cast-iron drain stacks cracked at the joints, and fittings that predate the materials now standard in new construction are all common findings in these older homes. Repairing a single section of that kind of pipe can work, but it is worth knowing what the rest of the run looks like before committing to a repair that may need to be repeated in six months.
We work on older pipe regularly. That means knowing which materials are still compatible with what is in the wall, which repairs hold on aging pipe and which ones do not, and when a targeted repipe of a problem run is the more practical answer than another patch. Drain and pipe work is carried out to code, and we explain what the project involves before any work begins.
When a home has had the same section of pipe repaired more than once, that is usually the signal. A single pipe replacement in the affected run can solve the recurring problem without touching the rest of the system. You will find the rest of it on our plumbing service list.
We take calls from across Glenshaw and the surrounding communities throughout Allegheny County. That includes Shaler Township, Allison Park, Ross Township, Etna, and West View. Whether the property is a single-family home, a rental unit, or a commercial building, the same scope of work applies.
Coverage means we schedule work at your address. It does not mean a different process or a different set of services depending on which town you are in.
Call (412) 991-9789 and we will confirm your address falls within our service range.
We provide documentation of the work completed. If you need a record for a landlord, a property manager, or an insurer, let us know when you call and we will confirm what is included at the end of the job.
It depends on the job. For fixture repairs and drain work, the main supply often stays on and only the local shutoff for that fixture is closed. For pipe repairs, a repipe, or main line work, the supply to a larger section of the property may need to be off for the duration of that phase. We tell you what to expect on the call before the visit is scheduled.
A backflow preventer that is leaking at the relief valve, failing a pressure test, or showing visible corrosion at the body may be repairable depending on the device type and how far the deterioration has gone. One that has cracked, seized, or failed in a way that affects supply pressure throughout the building typically needs to be replaced. We assess the device on the visit and explain what we find before recommending either path.
Yes. For property managers handling repairs across multiple units in the same building, we discuss the full scope on the call and coordinate the work accordingly. Each unit's repair is priced individually, but the scheduling and access logistics are worked out together so the job runs efficiently.
Yes. We serve Shaler Township, Allison Park, Ross Township, Etna, West View, and the surrounding parts of Allegheny County. The same services, the same scheduling process, and the same pricing approach apply across the full service area.
Call (412) 991-9789 and we will confirm your address.
Call us as soon as possible at (412) 991-9789 to reschedule.
If access to the property was arranged through a tenant or a property manager, confirm with them directly that someone will be available. For jobs that require the water to be shut off, someone needs to be reachable even if they are not physically present.
It can, though it requires coordination with the tenants around the periods when the water will be off. We discuss the schedule in advance so tenants are not caught without running water unexpectedly. The work is planned in phases where the layout allows it, to minimize the disruption to each unit.
It does, and it is worth mentioning when you call. Older homes in this area commonly have galvanized supply lines, cast-iron drain stacks, and shutoff valves that have not been operated in years. Knowing that before the visit helps us scope more accurately and arrive with the right materials for what we are likely to find.
The next step is a phone call and a few questions. Describe what is happening, where in the home it is occurring, and whether you have already shut the water off. We scope the job, give you a rate, and confirm when we can be there. Dripping faucet fixed. Slow drain cleared. Water flowing right.
Call (412) 991-9789 to get a price or schedule a visit with Mt. Lebanon Plumbing Company.
Browse our full list of areas. We are close by in: O'Hara Township, Stowe Township, McKees Rocks, Crafton, Cranberry Township.
Every plumbing job in Glenshaw starts with a phone call and a straight answer about what the work involves. We cover the full range of residential and commercial plumbing, from a backed-up drain to a whole-home repipe, and we give you a price on the call before anything is scheduled. The table below lays out what each service covers, who it fits best, and what is worth knowing before you book.
| Type of Job | What the Job Covers | When to Call | Things to Keep in Mind |
|---|---|---|---|
| Water Softener Installation |
| Homes with hard water causing scale buildup in pipes or reduced fixture life | Water hardness varies across Allegheny County. A softener installed at the main supply line treats water before it reaches the water heater and all fixtures, which extends the life of both. |
| Water Heater Repair & Replacement |
| Households with no hot water, inconsistent water temperature, or an aging tank | We check the unit before recommending replacement. When a new unit is the right call, we install both tank and tankless models and confirm the price before scheduling. |
| Drain Cleaning & Clog Removal |
| Homeowners dealing with slow or fully clogged drain | Recurring clogs in the same drain often point to buildup deeper in the line than a standard snake can reach. Hydro jetting clears the pipe wall, not just the clog. |
Call (412) 991-9789 and describe what you are dealing with. We will scope the job, give you a rate, and get the visit on the schedule.
(412) 991-9789